Additel 226, User Manual

Page: 85 / 107

73
Table 29 Delta-pressure flowmeter task setting
Subject Valid value Description
Name Numbers, letters, symbols Task name
S/N Numbers, letters, symbols Task S/N
Model Numbers, letters, symbols Model of DUT
Input Numbers Input range of DUT
Output Numbers
Output range of DUT, switch the unit to change the input signal
type (current/ voltage)
Accuracy
0.06%,0.1%,0.16%,0.25%,0.4%,
0.6%,1%,1.6%,2.5%,4%,custom
Accuracy of DUT, the output is customizable
Transfer function Linear / square / square root Transfer function of the DUT signal
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.3.
4. Start the task

For part of the content, refer to Start the task in paragraph 6.1.1.4.

The calibrator will automatically use the measured value of the voltage or current gear position according to the
DUT output type set by the user, no manually input required.