Additel 226, User Manual

Page: 86 / 107

74
5. Finish the task
Refer to Finish the task in paragraph 6.1.1.5.
6.3.2 Instantaneous flowmeter
1. Connect to DUT

According to the type of the DUT, connect the DUT input with the current output (Figure 14), voltage/ frequency
output (Figure 13) of the calibrator’s electrical output module.
2. Create the task
Create the corresponding DUT tasks as described above, and fulfill the necessary information. See Table 31.
Table 30 Instantaneous flowmeter task setting
Subject Valid value Description
Name Numbers, letters, symbols Task name
S/N Numbers, letters, symbols Task S/N
Model Numbers, letters, symbols Model of DUT
Input Numbers
Input range of DUT, switch the unit to change the input signal
type (current/ voltage/ frequency)
Output Numbers Output range of DUT, variety of flow units available
Decimals Option 0~3 The last decimal digit of the DUT’s display
Accuracy
0.06%,0.1%,0.16%,0.25%,0.4%,
0.6%,1%,1.6%,2.5%,4%,custom
Accuracy of DUT, the output is customizable
Transfer function Linear / square / square root Transfer function of the DUT signal