50
4. Click the "Finish" button to send the calibration data to the module to complete the calibration.
5. Click the "Restore to factory data" button at the bottom of the calibration interface to restore the factory calibration data
of the device. Click the “Cancel Zero" button below to clear data of the current signal gear.
4.3.2 Maintenance
Enter the password for this function, default password is 123456.
Maintenance record: view and edit maintenance information.
Calibration record: view the calibration history.
Pressure module overpressure record: view the pressure module overpressure information.
Operation information: view barometric pressure, mainboard and battery information.
4.3.3 4.3.3 Restore to factory data
Enter the password for this function, default password is 123456.
Restore to the factory data will not restore the system calibration data.
4.4 Personalization
4.4.1 Sound
Change the sound level by adjusting the volume bar. It also provides sound configuration, as in Table 19.
Table 18 Sound settings
Subject
Valid Value
Comment
Touch sound
On / Off
Touch sound setting
Prompt sound
On / Off
Prompt sound setting
Over range sound
On / Off
Over range sound setting
Summary of Contents for 226
