Additel 226, User Manual

Page: 103 / 107

91
♦
Display the real-time data and statistical information of each logging channel (maximum, minimum, average, peak
and standard deviation)
♦
Click on the channel to control the display or hiding of the channel in the curve. If the channel is set to hide, the
display color of the channel data text will change to white (using dark theme);
♦
The display area can only show up to two channels at the same time. When the number of channels exceeds two,
you can switch to other channel display by sliding left and right:
3. Record operation information display area
Click the data record curve display area to open the record data operation display area. The recorded data operation
display is divided into three modes: eye pattern mode (default), analysis mode, and following mode.
♦
Eye pattern mode
：
The eye pattern mode is the normal data operation mode, and its data curve is drawn by the data of the whole period
of operation.
♦
Analysis mode:
The analysis mode mainly analyzes the data of certain period time on the curve in the data logging and view the
statistical information of the corresponding channel (view through the channel information display area). In the
analysis mode, you can operate the operable buttons in the logging data display area (Move left/right, zoom in/out,
full record time, window time) to move the curve, and then operating the data segment selection axis operation
buttons (X1, X2) to select the data area to analyze and click the return button to view data statistics of each channel.
♦
Following Mode
：
The following mode is based on the time width of the current window, when the curve runs to the end of the curve
frame, the start time in the data image will automatically change, so that the image curve can show the latest running
status. You can adjust the width of the display time axis to display the curve in data logging operation area.