Additel 226, User Manual

Page: 66 / 107

54
6. Task
The calibrator provides a powerful task function, which can realize fully automatic calibration. At the same time, the
calibration data can be automatically collected, stored, and analyzed, and it can be easily executed and viewed repeatedly.
Click the task icon on the main interface of the device to enter the task interface.
The documentary task provides task types for four types of equipment: pressure, temperature, flow and loop. There
are multiple detailed classifications under each task type, and a total of 19 types of DUTs are supported. The process of
using the document task function is as follows:
(1) Create task: Click the add task button at the bottom left of the interface, and click the task type you want to create in
the pop-up DUT type selection interface.
(2) According to the task creation interface presented on the interface, input the information needed to create the task
accurately and in detail (for example: task name, DUT range, etc.). After completing the information, click the OK
button to save the task information. The tasks created after the task information is saved will be added to the task
list in the main interface of the task.
(3) Select the task just created, and click the button to run the task. Complete the configuration required for task
operation and execute the task according to the guidance of the task operation interface.
(4) After the task is executed, click the save button and complete the information required for saving the task data in
the pop-up task saving interface. Click the confirm button to save the task data.
6.1 Calibration pressure devices
6.1.1 Dial pressure gauge and digital pressure gauge
1. Connect to DUT
Connect the external pressure module to the Lemo type connection A or B.