Additel 226, User Manual

Page: 69 / 107

57
(3) Repeat step 1 and 2 until the whole task is finished.
5. Finish the task
After the task is finished, the task report will automatically come up. In the task report page, you can view the detailed
data of each set point. Click the save button at the bottom right of the interface to fulfill in the information required,
and save the task data of the result.
Table 22 Save task data setting
Subject Valid value Description
Operator Numbers, letters, symbols Information for operator
Date and time Valid date and time Date and time of the task performing
Temperature Number(
℃
as unit) Ambient temperature when task performing
Humidity Number(%RH as unit) Ambient humidity when task performing
Save as As found/ As left/ Both Result type
6.1.2 Pressure transmitter
1. Connect to DUT

Connect the external pressure module to the Lemo type connection A or B.

Connect the DUT output with calibrator’s electrical module according to DUT output signal type. (current: figure
7/voltage: figure 6/HART: figure 10 or 11)
2. Create the task
Create the corresponding DUT tasks as described above, and fulfill the necessary information.