Additel 226, User Manual

Page: 45 / 107

33
3.3.2 Thermocouple settings
Click the "Setup" button of the thermocouple measurement channel to set various parameters for the thermocouple
measurement function, see Table 11.
Table 11 TC settings
Subject Valid Value Description
Sensor type mV/ All supported TC types Select the type of thermocouple sensor
Cold junction type Auto/Fixed
Select the cold junction compensation method, auto means to use
the built-in cold junction sensor of the calibrator
Ext CJC value -80~300
Set customer value for the cold junction compensation value, only
available when user selects fixed as the cold junction type
Temperature unit K /
℉
/
℃
Temperature unit selection
Resolution 0/0.1/0.01/0.001 Temperature display resolution
3.3.3 RTD measurement
The connection of RTD measurement is shown in the Figure 9. Then click the features switching menu of channel 1
and select the RTD measurement.