Additel 226, User Manual

Page: 95 / 107

83
2. Create the task
Create the corresponding DUT tasks as described above, and fulfill the necessary information.
Table 36 Limit switches task setting
Subject Valid value Description
Name Numbers, letters, symbols Task name
S/N Numbers, letters, symbols Task S/N
Model Numbers, letters, symbols Model of DUT
Range (4~20)mA,(0~10)mA,(0~20)mA,(1~5)V,(0~5)V,(0~10)V, custom Input range of DUT
Accuracy 0.5%,1%,1.5%,2%,2.5%,custom Accuracy of DUT
Set point Numbers Action set point of DUT
Set action type Open/ closed Action type of DUT
Dead band Numbers
Switch difference range of the DUT(dead
band)
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.3.
4. Start the task