Additel 226, User Manual

Page: 72 / 107

60
Set point Numbers Action set point of the DUT
Set action type Open / closed Action type of the DUT
Dead band Numbers Dead band range of the DUT
Owner Numbers, letters, symbols Owner of DUT
Location Numbers, letters, symbols Location of DUT
Note Numbers, letters, symbols Additional information
3. Task setting
Refer to the task setting in paragraph 6.1.1.3.
4. Start the task

For part of the content, refer to Start the task in paragraph 6.1.1.4

When the pressure switch moves (open/close) during the task, the calibrator will automatically record the
pressure value at the moment of the action, without manually input.
5. Finish the task
Refer to Finish the task in paragraph 6.1.1.5.
6.1.4 I/P Converter
1. Connect to DUT

Connect the external pressure module to the Lemo type connection A or B.

As shown in the Figure 17, connect the DUT output with calibrator’s electrical module.