ADB Safegate RELIANCE Intelligent Lighting Platform III, User Manual

Page: 61 / 118

4.2 Commands in normal Operation
Switching commands for the lamps are given in normal operation via segment
1
switching commands. The following
circumstances must be considered for operation purposes:
•
possibility to define up to 24 segment addresses within one series circuit
•
a group has to consist of at least one and a maximum of 70 lamps
•
feedback from the field is sent one after another by the remotes after requesting the feedback
2
•
order of sent feedback corresponds to the addresses
•
request for feedback interval is parameterizable
4.3 Commands in Service operational Mode
Apart from time-optimized commands there are also special commands available in service operational mode.
For using the special commands, the Constant Current Regulator must be set to "local" mode (see
Parameterizing the
Constant Current Regulator ) and a service PC with lucDMC must be connected to the regulator.
In service mode all commands that are required for extended function testing of the remote and the lights are available.
Configuration of the system or single remotes can be changed directly in the series circuit. Remotes can be controlled
indicating the unique remote address or the unique series number for first address assignment (indicated on the remote
label).
1
In some of the technical documents and the user interface of lucDMC the term "group" is used instead of "segment". The term
"segment" is used in technical documents to keep documentation consistent.
2
In some sections of the technical documents and the user interface, the term "telegram" is used instead of "command".
UM-5005, Rev. 004, 2020/08/06 49
Copyright
©
ADB SAFEGATE, All Rights Reserved