ADB Safegate RELIANCE Intelligent Lighting Platform III, User Manual

Page: 64 / 118

Table 4: System parameters — SCROLL remote and system (continued)
System parameters Description
Delay between relay and FET (for
communication):
Internal parameter
High power mode (for feedback): Maximum output performance per channel
Number of half cycle to detect open
load (for load monitoring):
Number of current half-cycles
Factor for FET duration (10) (for
feedback):
Fine-adjustment for current stages from 10 % to 30 % or more
Factor for FET duration (30) (for
feedback):
Fine-adjustment for current stages from 30 % or more
Circuit topology (for power supply) Series circuit topology for 2,2 A or 6,6 A
4.6 Setting General Parameters in lucDMC for the Constant Current Regulator type E
1. Select the general circuit parameters tab.
2. Type in a circuit name into the circuit name text field.
The circuit name to be indicated here will be shown on the LCD display of the CCRE and in the visualization systems of
control technology station. Possible characters include all letters of the alphabet and numbers as well as some special
characters like a hyphen or underscore, etc. The circuit name may only contain 8 characters.
Figure 34: Circuit name — general circuit settings
3. Select general settings tab and type in the desired values for the "default settings" (factory settings) parameters:
Figure 35: Default settings
Table 5: Parameters — CCRE
Parameter Description
Communication interface: Indicates the interface to the respective control technology station
Menu language: Defines the applied language in the regulator menu and all views on the display.
UTRMS baud rate correction: Refer to “Advanced CCRE features” section in COSAL CCRE manual.
Serial number: Serial number of CCRE; defined by ADB SAFEGATE production
Profibus activated: CCRE has got an Profibus interface
User password: The password for login to CCR menu can be set here
RELIANCE Intelligent Lighting
Operation
52
Copyright
©
ADB SAFEGATE, All Rights Reserved