ADB Safegate RELIANCE Intelligent Lighting Platform III, User Manual

Page: 105 / 118

The description above the photo shows what is shown on the LC display. The remarks on the sides and below the photo
describe the buttons, handles and the ports placed next to the display.
Refer to COSAL CCRE manual for further information.
Figure 69: CCRE interior with RELIANCE IL CU
CAUTION
Make sure that the rated voltage of the equipment is in accordance with the local supply voltage.
CAUTION
The current regulation is +/- 100 mA. To make an acceptable readjustment of the output current, the precision of the
meter should be better than 0.5% for the adjusted value.
CAUTION
Inspection for damaged cables and / or connectors.
DANGER
Make sure you have turned off the regulator before working on the serial circuit. Usage of an ADB SAFEGATE cut-out
device is recommended. Refer to the series cut-out device (type SCO) manual for further information.
Figure 70: Cut-out device operating positions
CCR
Load
ON
ON
NOTICE
Make sure you disconnect the external circuit before working on a remote. Failure to disconnect the circuit may
destroy the remote.
UM-5005, Rev. 004, 2020/08/06 93
Copyright
©
ADB SAFEGATE, All Rights Reserved