Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 98 / 233

5-59
container Commands
The Partition Offset:Size Column
This column displays the offset and size for the underlying
partitions.
If a partition is dead, the “:” (colon) in the Partition Offset:Size
column changes to a “!” (exclamation point). See the
disk remove
dead_partitions
( page 7-9 )
command for more information
on dead partitions.
The State Column
This column displays information about the state of the array.
Specifically, the column can display the items listed in Table 5-3.
The RO Column
This column displays the letters
RO
if the array is read-only.
Otherwise, if the array is read-write the column displays a blank
space. You can explicitly make an array read-only and read-write
Table 5-3. Container State Items
Container State Meaning
Copy
Indicates that the array is the copy array in an array
reconfiguration operation.
Create
Indicates the creation of a mirror set.
Dest
Indicates that the array is the destination array in an
array reconfiguration operation.
Normal
Indicates that the mirror set is in the normal state.
Raid5
Indicates that the array is a RAID-5 set in an array
reconfiguration operation.
Source
Indicates that the array is the source array in an array
reconfiguration operation.
Temp
Indicates that the array is a temporary array in an
array reconfiguration operation.
Unprot
The RAID-5 set is not redundant. The
Unprot
array
state typically displays during the creation of the
RAID-5 set. Upon completion of RAID-5 set creation,
the CLI replaces the
Unprot
state with the
Normal
state.