Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 34 / 233

3-12
Syntax and Conventions for CLI Commands
The Ctr and State Items
The Ctr item displays the ID number of the array associated with the
task. In the example, the array’s ID is 0 (zero).
The State item displays the state of the task along with a running
percentage value that indicates the progress of the currently running
task. The item shows the percentage in tenths of a percent
increments. The currently running task is complete when the State
item displays 100%.
Table 3-8 describes the state values that the State item can display.
Table 3-8. State Values
State Meaning
BAD
The task failed and is no longer running.
DNE
The task successfully completed or the task is
no longer running (that is, the task is done).
RUN
The task is running.
SUS
The task was suspended. Typically, you
suspend a task with the
task suspend
command.
UNK
The controller reported an unknown status for
the task.