Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 77 / 233

5-38
container Commands
The following list describes the columns that contain information as
the result of creating a volume set with the
container create
volume
command:
■
The Num Label column displays the ID number of the newly
created volume set, which in the example is 0.
If you specify a label when creating the volume set, it appears
in this column. Because no label was specified when the
volume set was created, no label appears in the column.
On UNIX systems, the root special file associated with the
array also appears in this column.
■
The Type column displays Volume to indicate that the newly
created array is a volume set.
■
The Total Size column displays the value(s) specified in the
free_space
parameter(s), which in the example is 15.0 MB.
■
The Usage column displays None to indicate that the newly
created volume set does not have a file system on it. To create
an NTFS or FAT file system on an array, use the
container
format
command.
■
The Scsi C:ID:L column displays the SCSI device ID for the
disk on which you created the volume set, which in the
example is 0:02:0.
■
The Partition Offset: Size column displays the partition offset
and the size of the newly created volume set’s partition, which
in the example are 64.0 KB and 15.0 MB. The size is the size you
specified in the
free_space
parameter(s).
Related Information
container
commands:
■
container extend volume
( page 5-50 )
■
container format
( page 5-54 )
■
container list
( page 5-54 )
■
container promote
( page 5-69 )
■
container set cache
( page 5-97 )
■
container set label
( page 5-107 )