Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 84 / 233

5-45
container Commands
3
Assign a drive letter to the volume set created in Step 1 with
the
container assign drive_letter
command.
4
Create an NTFS file system on the volume set created in Step 1
with the
container format
command.
5
Create a second volume set of 100 MB on disk (1,1,0) with the
container create volume
command.
6
Create a third volume set of 100 MB on disk (1,2,0) with the
container create volume
command.
7
Used the
container extend mvolume
command to add
the arrays created in Steps 5 and 6 to the array created in Step
1.
The following example extends the NTFS file system to make use of
the additional arrays:
AAC0>container extend file_system 0
Executing: container extend file_system 0
The system has been marked to expand the file system on
the next reboot.
Reboot the system to get the file system to expand to
show the new space.
Use the
container list
command after using the
container
extend file_system
command to display information about the
array after you extend a file system. Note that there is no change in
the display as a result of using the
container extend
file_system
command.
Related Information
container
commands:
■
container format
( page 5-54 )