Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 89 / 233

5-50
container Commands
container extend volume
To extend a volume set by adding freespace to it, use the
container extend volume
command. The file system on the
volume set remains intact and can be extended to include the added
space.
Command And Switch Availability
This command and its associated switches (if any) are supported on
the following operating systems:
■ Windows NT
■ Windows 2000 (basic disk only)
■ Windows XP (basic disk only)
Syntax
container extend volume {container}
[{free_space}] [{free_space}...]
Parameters
{container}
Specifies the ID number (0 to 63) of the array (volume set) to
extend.
{free_space}
Specifies the SCSI device and its associated freespace used to
extend the specified array (volume set). See the
scsi_device
section on page 3-7 for more information on how to specify the
SCSI device. See the
free_space
section on page 3-8 for
more information on how to specify the freespace.
{free_space}...
Specifies a SCSI device or devices and associated freespace or
freespaces used to extend the specified array (volume set). You
can specify a maximum of 16 freespace elements. If you exceed
16 freespace elements, the command displays an appropriate
error message.