Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 156 / 233

5-117
container Commands
container unlock
Caution:
Use the
container unlock
command only
under the direction of Technical Support.
To unlock an array so it can be moved, deleted, made read-only, and
used to create a multilevel array, use the
container unlock
command.
Syntax
container unlock {container}
Parameters
{container}
Specifies the ID number (0 to 63) of the array to unlock.
Examples
Before unlocking an array, use the
container list
command
(with the
/full
switch) to obtain information about any existing
arrays. As the following example shows, there is an array 0 (a
volume set) on this controller. Note that the
Lk column displays an
L, which indicates that array 0 was previously locked with the
container lock
command:
AAC0>container list /full
Executing: container list /full=TRUE
Num Total Oth Stripe Scsi
Dr Label Type Size Ctr Size Usage C:ID:L Lk
-- ----- ------ ------ --- ------ ------- -------- --
F: 0 Volume 10.0MB NTFS 0:02:0 L
Note that the example eliminates some items in the
container
list
display so that you can see an example of the Lk column.
!