manualshive.com logo in svg

Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 102 / 233

Share
Download
Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller Software Reference Manual Download Page 102

5-63

container Commands

■

ss 

is a two-digit number that indicates the second at which 

you created the array.

The Boot Device Column

This column displays a value that indicates whether the array 
resides on the boot device. An X appears in the column if the array 
resides on the boot device. Otherwise, if the array does not reside on 
the boot device, no value appears in the column. 

The 

Boot Device

 column does not appear on UNIX systems.

The System Files Column

This column displays a value that indicates whether the array 
resides on the system device. An X appears in the column if the 
array resides on the system device. Otherwise, if the array does not 
reside on the system device, no value appears in the column.

Summary of Contents for 2254100-R - SATA RAID 2410SA SGL/64 Controller










































































































































































































































Reviews:

No comments