Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 18 / 233

1-3
Getting Started
technology, the software has been adapted by mapping of ports 0
through 3 to the following SCSI IDs:
■
Bus 0, ID 0, Lun 0
■
Bus 0, ID 1, Lun 0
■
Bus 0, ID 2, Lun 0
■
Bus 0, ID 3, Lun 0
In general, SCSI IDs will be populated from Bus 0, ID 0 upwards
(always LUN 0).
Organization
Chapter 1, Getting Started, provides an overview of this reference
guide.
Chapter 2, Accessing the Command Line Interface , provides
information on the ways you can access the CLI.
Chapter 3, Syntax and Conventions for CLI Commands , describes the
features, conventions, command syntax, parameters, and value
types that define the command line interface.
Chapter 4, General Control Commands , details general purpose
commands such as
open
and
close
.
Chapter 5, container Commands , describes all the commands related
to arrays.
Chapter 6, controller Commands , describes all the commands related
to controllers.
Chapter 7, disk Commands , describes the commands related to disks.
Chapter 8, logfile Commands , describes the commands used to record
CLI command activities.
Chapter 9, task Commands , describes the commands used to work
with tasks.
Appendix A, Automated Scripts , provides examples of how to use the
CLI commands in DOS command scripts.