Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 105 / 233

5-66
container Commands
Use the
container list
command (with the
/full
switch) after
using the
container lock
command to display information
about the array you just locked, as in the following example:
AAC0>container list /full
Executing: container list /full=TRUE
Num Total Oth Stripe Scsi
Dr Label Type Size Ctr Size Usage C:ID:L Lk
-- ----- ------ ------ --- ------ ------- -------- --
F: 0 Volume 10.0MB NTFS 0:02:0 L
Note that the example eliminates some items in the
container
list
display so that you can see an example of the Lk column.
As the result of locking an array (in this example, array 0) with the
container lock
command, the Lk column displays L (instead of
a blank) to indicate that the specified array is now locked.
Related Information
container
commands:
■
container list
( page 5-54 )
■
container unlock
( page 5-117 )