Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 182 / 233

6-23
controller Commands
controller show channels
To show all of the channels on a controller and the associated
characteristics of each channel, use the
controller show
channels
command. See the installation guide for your controller
to determine the number of channels it actually supports.
Syntax
controller show channels
Examples
In the following example, the system displays the channels on the
currently opened controller:
AAC0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type Max Usage
--- ------- ------- --------- ---------
0 15 15 NoInfo NoInfo
The following sections provide more information on the items that
the
controller show channels
command displays.
The Ch# and Host ID Items
The Ch# item displays the number of the channel on the controller.
In the example there are four channels on the currently opened
controller. See the installation guide for your controller to determine
the number of channels it actually supports.
The Host ID item displays the device ID of the host controller, which
in the example is 7 for all channels.
The Targets and Type Items
The Targets item displays the number of device IDs not including
the controller ID, which in the example is 15 for all channels.
The Type item displays the SCSI channel type the channel is capable
of supporting, which in the example is NoInfo for all channels.