Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 223 / 233

9-6
task Commands
Table 9-2. State Values
The Specific1 Column
The Specific1 column displays additional information for certain
tasks that appear in the Task Id column. Table 9-3 lists the tasks for
which the
task list
command can display additional
information. Table 9-3 also describes the additional information that
task list
can display.
Table 9-3. Additional Specific1 Information
The Specific2 Column
The
Specific2
column displays additional information for certain
tasks that appear in the
Task Id
column. Table 9-4 lists the tasks for
which the
task list
command can display additional
information. Table 9-4 also describes the additional information that
task list
can display.
State Meaning
BAD
The task failed and is no longer running.
DNE
The task successfully completed or the task is no longer
running (that is, the task is done).
RUN
The task is running.
SUS
The task was suspended. Typically, you suspend a task with
the
task suspend
command.
UNK
The controller reported an unknown status for the task.
Task Additional Information
Verify
. Refers to the verify with
no repair of bad blocks task, which
runs as a result of using the
disk
verify command without the
/repair
switch.
Displays the number of bad blocks
found with no replacement.
The example displays zeroes,
which signifies no errors found.
Scrub. Refers to the scrub task,
which runs as a result of using the
array scrub command.
Displays the number of sectors
that were different.