Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 203 / 233

7-19
disk Commands
disk show smart
To display S.M.A.R.T. configuration information for one or all disks,
use the
disk show smart
command. The acronym S.M.A.R.T.
stands for Self-Monitoring, Analysis and Reporting Technology. This
technology is an industry standard for hard drives that monitors a
variety of disk parameters, such as the rate of read-write errors. In
addition, S.M.A.R.T. can send an alert to system administrators
about potential problems caused by disk errors.
Syntax
disk show smart [/all{=boolean}] [/full{=boolean)]
[/view_changeable{=boolean}][{scsi_device}]
Parameters
{scsi_device}
Specifies the ID for the SCSI disk for which you want to
display S.M.A.R.T. configuration information. A SCSI ID
consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.),
device ID (0 through 15 inclusive), and device logical unit
number (0 through 7 inclusive). See the
scsi_device
section
on page 3-7 for more information on how to specify the SCSI
device.
You do not need to specify a SCSI ID if you use the
/all
switch.
Switches
/all{=boolean}
Specifies whether to display S.M.A.R.T. configuration
information for all disks on the system. If you specify
TRUE
for
this switch, the command displays S.M.A.R.T. configuration
information for all disks on the system.
This switch defaults to
TRUE
.
/full{=boolean}
Specifies whether to display detailed S.M.A.R.T. configuration
information for one or all SCSI disks. If you specify
TRUE
, the
command displays detailed S.M.A.R.T. configuration