Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 124 / 233

5-85
container Commands
Use the
container list
command after using the
container
remove drive_letter
command to display information about
the array on which you just removed a drive letter, as in the
following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB
As the result of removing a drive letter from an array (in this
example, array 0) with the
container remove drive_letter
command:
■
The Dr column no longer displays the drive letter assigned in a
previous use of the
container assign drive_letter
command. In this example, the letter
F
no longer appears in the
Dr column.
Related Information
container
commands:
■
container list
( page 5-54 )