Adaptec 2254100-R - SATA RAID 2410SA SGL/64 Controller, Software Reference Manual, Page: 71 / 233

5-32
container Commands
Examples
Before creating a stripe set, use the
disk show space
command
to obtain information about the available devices, as in the following
example:
AAC0>disk show space
Executing: disk show space
Scsi C:ID:L Usage Size
----------- --------- -------------
0:00:0 Free 64.0KB: 11.0MB
0:01:0 Free 64.0KB: 11.0MB
0:02:0 Free 64.0KB: 49.0MB
0:03:0 Free 64.0KB: 49.0MB
0:04:0 Free 64.0KB: 49.0MB
0:05:0 Free 64.0KB: 49.0MB
0:06:0 Free 64.0KB: 11.0MB
0:08:0 Free 64.0KB: 11.0MB
The example list shows that there are eight SCSI disks available to
create the stripe set. There must be enough contiguous freespace on
all the specified drives.
The following example shows how to create a stripe set with the
following characteristics:
■ 15 MB of freespace on the (0,2,0) SCSI disk
■ The default stripe size of 64 KB
■ Two freespaces of 15 MB on the (0,3,0) and (0,4,0) SCSI disks
AAC0>container create stripe ((0,2,0), 15M) (0,3,0) (0,4,0)
Executing: container create stripe ((CHANNEL=0,ID=2,LUN=0),15,728,640 )
(CHANNEL=0,ID=3,LUN=0) (CHANNEL=0,ID=4,LUN=0)
container 0 created
On UNIX systems, the message displayed after you execute the
container create stripe
command includes the root special
file associated with the newly created stripe set.
Use the
container list
command after using the
container
create stripe
command to display information about the stripe
set, as in the following example:
AAC0>container list
Executing: container list
Num Total Oth Stripe Scsi Partition
Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ----- ------ ------ --- ------ ------- ------ -------------