Actidata actiNAS cube RDX User Manual Download Page 94

Page: 94 / 168

actiNAS Manager

Network

DHCP (Internet Gateway)

NAS

provides Internet gateway function for administrator to easily enable and disable the Internet access

for users. This function integrates with DHCP service, routing and NAT.

DHCP (Internet Gateway) Options

IP range starting from

Means the starting address of range of private IP addresses for DHCP.

IP range ending with

Means the ending address of range of private IP address for DHCP.

Private Net

The network device connected to the private network.

WAN

The network device connected to the Internet / WAN.

NOTE: This function must be configured in System



Service tab. Select DHCP service.

NOTE: Please refer to page 116 on how to use DHCP (Internet Gateway).

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands