Actidata actiNAS cube RDX User Manual Download Page 74

Page: 74 / 168

actiNAS Manager

Storage/Share

How to Setup the NAS as RsyncClient

The NAS can function as Rsync client using the Data Backup feature. To setup the NAS as Rsync client:

1. Select Data Backup. Click

Create

2. Setup Rsync client options. Enter the Backup Name and select the Backup Method as Rsync.

Select the share (only one share) that will be used for back up using Rsync. In the Client Options,
setup the IP, Remote Path, Account, Password, and Mode.

Rsync Client Options

the IP address of the remote Rsync server

Remote Path

the share name on the remote Rsync server

Account

the account name that will be required by the Rsync server for authentication

Password

the password of the account

Mode

Select the mode of file transfer, whether to upload to Rsync server or to download from

Rsync server

More Options

Specify here the Rsync options to be used. For more information about Rsync options,

please visit http://samba.org/ftp/rsync/rsync.html

NOTE: Only one share folder can be selected and used for Rsync backup, since the remote path is also single

share folder.

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands