Actidata actiNAS cube RDX User Manual Download Page 59

Page: 59 / 168

Storage/Share

· /

actiNAS Manager

6. Select

Rsync

option in Protocol Setting window. The Rsync configuration screen is displayed. If

share will be used for Rsync, setup the necessary options.

Rsync Configuration Options

Enable Rsync

Used to enable or disable Rsync Server function on this share folder. When enabled

(checked), an Rsync client can connect to this share folder and upload or download files via

Rsync.

Read Only

When checked, all files within this share will be read only to any Rsync client

Anonymous

When checked, anonymous connections will be accepted

Maximum connections

This specifies the maximum number of Rsync client that can connect to this share at a

certain time.

#username:password

Use this option to edit Rsync account and password list. These accounts are the accounts

that will be supplied by the Rsync client when connecting to this server

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands