117
System
· /
actiNAS Manager
Before configuring the DHCP service, make sure the network devices eth0 and eth1 are already assigned
the proper IP address in Network
Device Configuration.
To use the NAS as a DHCP server / Internet Gateway:
1.
Select the DHCP service in
System
Service
2. Click
Edit
,configure the following:
IP range starting from
Means the starting address of range of private IP addresses for DHCP
IP range ending with
Means the ending address of range of private IP addresses for DHCP
Private Net
The network device connected to the private network. For example: eth1
WAN
The network device connected to the Internet / WAN. For example: eth0
NOTE: In this example, eth1 is assigned to Private Net and must have an IP in the same subnet, for example: as
192.168.20.2
3. Click
OK
to save.
Summary of Contents for actiNAS cube RDX
Page 27: ...27 Overview of the NAS Setup Phases Installation Please refer to page 30 for more information ...
Page 60: ... actiNAS Manager Storage Share 60 7 Click Save when done Then Share Folder will be created ...
Page 73: ...73 Storage Share actiNAS Manager ...
Page 155: ...155 File Manager actiNAS Manager Admin is logged in Local user testuser is logged in ...