Actidata actiNAS cube RDX, User Manual

Page: 131 / 168

131
System · / actiNAS Manager
Configuration
Import Config Use this button to import and restore a previously saved (exported) NAS system
configuration.
NOTE: Import Config function requires that the NAS be reset to factory default setting before a saved
configuration file can be restored.
NOTE: If you have made a Data Backup to Local Disk (or external eSATA disk), shutdown the NAS and remove
the Local Disk (or eSATA disk) with Data Backup, then power on the NAS and do Reboot to Default . If the Local
Disk with Data Backup is in the NAS when Reboot to Default is executed, the data on the Local Disk will also be
cleared.
To import configuration:
1. Use Reboot to Default to reset the NAS to factory default settings.
2. After reset to default, login to NAS GUI. You may need to verify the assigned IP of the NAS.
3. When the warning message below appears, select No .