Actidata actiNAS cube RDX User Manual Download Page 30

Page: 30 / 168

actiNAS Manager

Storage/Share

actiNAS Manager

There are six management functions used to configure or manage the NAS.



Network



System



Storage/Share



Account



Data Backup



File Manager

Storage/Share

RAID / Disk Information

Click the Storage/Share icon then select RAID tab. The RAID Configuration and Disk Information window
will

displayed.

NOTE

: The Storage/Share



RAID function is normally used when creating a customized RAID configuration.

This can be used when the Quick Setup has not been done yet, or Quick Setup has already been done but the

RAID will be expanded using new disk drives.

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands