Actidata actiNAS cube RDX User Manual Download Page 14

Page: 14 / 168

Installation ·

Identifying Parts of the NAS System

Environmental Status LEDs

Parts

Function

Voltage Warning LED

An alarm will sound warning of a voltage abnormality and this LED will
turn red.

Fan Fail LED

When fan fails, this LED will turn red and an alarm will sound.

Over Temperature LED

If temperature irregularities in the system occurs (HDD slot temperature
over 55°C), this LED will turn RED and alarm will sound.

2.3.5Lock Indicator

Every Drive Carrier is lockable and is fitted with a lock indicator to indicate whether or not the carrier is
locked into the chassis. Each carrier is also fitted with an ergonomic handle for easy carrier removal.

Drive Tray Locked

Drive Tray Unlocked

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands