Actidata actiNAS cube RDX User Manual Download Page 53

Page: 53 / 168

Storage/Share

· /

actiNAS Manager

Remove iSCSI Configuration and Restore to NAS Volume

Steps to RemoveiSCSI Configuration and Restore to NAS Volume:

WARNING: When iSCSI Configuration is removed and volume is restored as basic NAS volume, all the data in

the volume previously configured as iSCSI Target are deleted.

NOTE: The iSCSI Configuration must be disabled first before the Volume can be restored as basic NAS volume.

See previous Section on how to disable iSCSI configuration.

1. Select the Volume with iSCSI Configuration and click the

iSCSI

button. Click the

Restore to

Volume

button.

2. A warning message will be displayed.

Summary of Contents for actiNAS cube RDX









































































































































































Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands

Actidata actiNAS cube RDX, User Manual

Search results

Summary of Contents for actiNAS cube RDX

Reviews:

Related manuals for actiNAS cube RDX

Brands by name

Popular brands