Acer HDS WMS100, Reference Manual

Page: 61 / 328

Acer | HDS WMS100™ User and Reference Guide 39
„
NNC Status
{
: Operation enabled -
：
Operation disabled
Image Status Stop Start Restart
NEW The NAS OS is not installed. - - -
INST The NAS OS is in installation process. - - -
ACTIVE The NAS OS is in operation and the Node is in operation.
○ ○ ○
STOP The NAS OS is normally stopped -
○ ○
DOWN The NAS OS is abnormally stopped -
○ ○
BOOT The NAS OS is in start process.
○
-
○
SHUTDOWN The NAS OS is in stop process. -
○ ○
INACTIVE The NAS OS is in operation and the Node is stopped.
○ ○ ○
DUMP A NAS Dump is being collected.
○ ○ ○
HUNGUP The NAS OS is hung-up. -
○ ○
WARN The NAS Manager is not installed, or the NAS OS is in operation
and the status of the Node is unknown.
○ ○ ○
DISUSE The Control Unit is blocked, so the NAS OS of the NNC concerned
cannot be used.(*1)
- - -
Note: It is necessary to recover the blocked status of the Control Unit connected to the NAS Unit on the side where “DISUSE” is
displayed.
„
Button
Button Name Operation
Shutdown Put the NAS OS into the stop status.
Boot Start the NAS OS.
Reboot Restart the NAS OS which is in the stop status. The operation is not different from the "Boot" button.
Refresh Update the display information to the latest information.
Note: When starting the NAS OS, do not specify anything for the Boot Option.