Acer HDS WMS100 Reference Manual Download

Page: 23 / 328

Acer | HDS WMS100™ User and Reference Guide

Chapter 1

Overview of the WMS100 Subsystem

This chapter includes the following:

Overview Features (see section 1.1)

Rack-Mount Model (see section 1.2)

Floor Model (see section 1.3)

This chapter provides information on the Fibre and NAS models. The following table
illustrates sections that provide an explanation for each model.

Fibre Model: Connects disk array subsystem to a host computer with Fibre Channel
interface.

NAS Model: Connects NAS Unit connected to disk array subsystem to a host computer
with LAN interface.

Sections Fibre

NAS

1.1

Overview Features

{

1.1.1 High Data Availability

{

1.1.2

Connectivity

{

1.1.3

Scalability

{

1.1.4 Performance Reporting and Monitoring

{

1.1.5 Reliability, Availability, and Serviceability

{

1.1.6 Hitachi Freedom Storage™ and Hitachi Freedom Data Networks™

{

1.2 Rack-Mount

Model

{

1.3 Floor

Model

{

−

{

: The explanation is provided.

—: The explanation is not provided.

Summary of Contents for HDS WMS100









































































































































































































































































































































Search results

Summary of Contents for HDS WMS100

Reviews:

Related manuals for HDS WMS100

Brands by name

Popular brands

Acer HDS WMS100, Reference Manual

Search results

Summary of Contents for HDS WMS100

Reviews:

Related manuals for HDS WMS100

Brands by name

Popular brands