manualshive.com logo in svg

Acer HDS WMS100, Reference Manual

Share
Download
Acer HDS WMS100 Reference Manual Download Page 175

 
 

 

Acer | HDS WMS100™ User and Reference Guide 

153 

 

7.10

 

Changing the Network Parameter 

Set a network parameter from the Storage Navigator Modular.  

Note:

 If the network parameter is changed for the array unit connected to the NAS unit, the 

cluster between the NAS Units stops. When the network parameter for the array subsystem 
is unavoidably changed, execute it after stopping the cluster between the NAS Units and 
stopping the NAS OS of both NAS Units. Start the cluster between the NAS Units again after 
completing the network parameter change for the array subsystem. 

To change a network parameter: 

1.

 

Turn on the power supply. 

2.

 

Start the Storage Navigator Modular and set the operation mode in Management Mode. 
Refer to the 

Hitachi TagmaStore

™ 

Adaptable Modular Storag

e 

and Workgroup Modular 

Storage Storage Navigator Modular Graphical User Interface (GUI) User’s Guide

 (MK-

95DF711). 

3.

 

Click the icon of an array unit on the Main window, and then select the File menu. Click 
Open. Alternatively, click Display Details on the tool bar: 

 

Summary of Contents for HDS WMS100









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands