manualshive.com logo in svg

Acer HDS WMS100, Reference Manual

Share
Download
Acer HDS WMS100 Reference Manual Download Page 110

88 

Chapter 5  Functional and Operational Characteristics 

5.5

 

Open Systems Features and Functions 

The WMS100 subsystem offers many features and functions specifically for the open-systems 
environment. The WMS100 subsystem also supports important open-system functions, such as 
fibre-channel arbitrated-loop (FC-AL) and fabric topologies, command tag queuing, multi 
initiator I/O, and most industry-standard software and middleware products which provide 
host fail-over, I/O path fail-over, and logical volume management functions. 

5.5.1

 

Open Systems Middleware 

Open-system middleware products provide host fail-over capability, I/O path fail-over 
support, and logical volume management in the open-systems environment. Middleware is 
not usually supplied as part of the basic operating system.  

5.5.2

 

LUN Management 

Each LUN can be assigned to multiple fibre-channel ports to provide I/O path fail-over with 
middleware support.  

Summary of Contents for HDS WMS100









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands