manualshive.com logo in svg

Acer HDS WMS100, Reference Manual

Share
Download
Acer HDS WMS100 Reference Manual Download Page 143

 
 

 

Acer | HDS WMS100™ User and Reference Guide 

121 

 

7.3.5

 

Setting a Logical Unit 

Note

: Execute the setting for the only system LU when the WMS100 is connected to the NAS 

in accordance with the following restrictions: 

Capacity Restriction 

No.  Internal 

LU 
Number 
(Note1) 

System LU 

Bytes Designation 

Block Designation 

Control 
unit in 
charge 
(Note2) 

1 

0 

For system disk (CTL 0) 

14,013 M bytes  

(or more) 

27,369,141 blocks  

(or more) 

0 

2 

1 

For system disk (CTL 1) 

14,013 M bytes  

(or more) 

27,369,141 blocks  

(or more) 

1 

3 

2 

For volume for storing dump (CTL 0) 

4,925 M bytes  

(or more) 

9,619,141 blocks  

(or more) 

0 

4 

3 

For volume for storing dump (CTL 1) 

4,925 M bytes  

(or more) 

9,619,141 blocks  

(or more) 

1 

5 

4 

For command device 

35 M bytes  

(or more) 

68,360 blocks  

(or more) 

0 

6 

5 

For the work for storing the dump 

edit result. 

4,195 M bytes 

 (or more) 

8,193,360 blocks  

(or more) 

0 

7 

6 

For the system sharing volume 

2,537 M bytes  

(or more) 

4,955,079 blocks  

(or more) 

0 

8 

7 

For the volume for back-upping a 

shared volume 

2,537 M bytes 

(or more) 

4,955,079 blocks  

(or more) 

0 

9 

8 

For the volume 2 for back-upping a 

shared volume 

2,537 M bytes 

(or more) 

4,955,079 blocks  

(or more) 

0 

Note1: 

Internal LU Number is recommended value. If value other than the values described above is set, there is no 

problem in system operation. 

Note2: 

Control unit in charge is recommended value. If value other than the values described above is set, there is no 

problem in system operation. 

Note

: When the AMS 500 is connected to the NAS, create the system LU and user LU 

different RAID groups respectively. 

To set a logical unit, follow these steps: 

1.

 

Turn on the power supply. 

Note:

 If the power supply has already been turned on, proceed to the next step. 

2.

 

Start the Storage Navigator Modular program, and set the operation mode to 
Management Mode. 

3.

 

Click the icon of an array unit on the Main window, select the Settings menu, and then 
click Display Details. Alternately, click Display Details on the tool bar. 

4.

 

Click the Logical Status tab on the Unit screen. 

Summary of Contents for HDS WMS100









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands