132
Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
7.4
Setting Host Group Information
In the WMS100, the Host Connection Mode, the mapping information of Logical Unit, and LUN
security information are set to the group of hosts, not to the host. This enables you to select
the host computer to which the subsystem is connected depending on each group of hosts.
For host groups, only the 000:G000 is supported. Up to 128 host groups can be set when the
LUN Manager (an extra cost optional feature) is used.
The host group Information does not need to be set for the NAS system.
7.4.1
Setting Mapping Information
To set mapping information:
1.
In the unit window, click the Logical Status tab.
2.
Double-click the Access Mode, and select Mapping Mode:
3.
On the Mode list, select Disable, and then click Modify:
4.
On the Mapping Mode dialog box, select the Enable radio button, and then click OK.
Summary of Contents for HDS WMS100
