![background image](http://html1.mh-extra.com/html/accu-turn/1400/1400_operators-manual_3738352063.webp)
64
ACCU 14
2
0
Trouble shooting
Operator’s Manual
7.1.1
E-codes.
When the E-code is displayed, a low beep is gener-
ated.
E22
Spinning timeout.
E23
Spinning speed not reached.
E24
Spinning speed too low.
The wheel has failed to be spun up to balancing speed
within the time limit set.
•
Check that the brake pedal or wheel is not blocked
by accident.
•
Check the power supply.
•
Call Accu Service.
E25
Reverse error.
The shaft turned in the wrong direction at a given
speed.
•
Apply the brake.
•
Call Accu Service.
E26
No acceleration.
Shaft acceleration was not detected.
•
Call Accu Service.
E27
Slip detected.
•
The wheel slips on the shaft. Mount wheel properly
insuring that sufficent torque is applied to wing nut.
E28
Speed limit reached.
•
Call Accu Service.
E29
START pushbutton pressed with wheel guard raised.
7.1
System messages.
The wheel balancer can show messages to the op-
erator. These may be error related (E-codes) or ser-
vice related (C-codes). The codes will be described in
the following chapters.
Whenever a code appears:
-
write it down
-
look up the code in the list. If the code is not de-
scribed, call Accu Service.
-
perform the steps described.
The format of this chapter is:
Code
Description
•
Step(s) to be performed.
Summary of Contents for 1400
