5-1
Questions? Refer to Page 10-10 for Technical Support Instructions.
The Precision Xceed Pro
Monitor stores the results of up to 2,500 patient tests, 1,000 control tests, 20 proficiency tests
and 2 linearity panels. This data can be retrieved by the following categories:
Patient by Operator ID (OperID):
This will show test results performed by a particular operator,
starting with the most recent test.
Patient by Patient ID (PatID):
This will show test results performed for particular patient,
starting with the most recent test.
All Patient Data:
This will display the test results for all patients, starting with the most recent test.
Control Data:
This will show control test results, starting with the most recent test.
Proficiency Data:
This will show proficiency test results, starting with the most recent test.
Linearity Data:
This will show linearity test results, by level and order.
Data Review
Note:
The monitor may be configured to require a valid Operator ID to view results.
Chapter 5: Data Review
What You See on the Display
What You Do
Comments
Note:
The following section illustrates some common settings. Depending on your institution's specific settings,
some screens will display differently or not at all. If the monitor does not display the screens shown, please
refer to Chapter 10, Troubleshooting.
Follow these steps to access the Data Review menu:
1.
Press the
On/Off
button to turn the
monitor on.
The Abbott logo screen will appear in black
for a few seconds and then will appear in
gray to ensure that the display is functioning
properly. Next, the software version will
briefly appear.
2.
Press the
Menu
button.
The monitor starts in
Test Mode
. The
Menu button will toggle the monitor to
Menu Mode
.
3.
Press
1
to select
Data Review.