1) Press and release main button " " to turn on the Meter.
2) Press and hold main button " " for seven seconds until you go into the setting mode. Before
you go into setting mode, you will see power off first. Please keep pressing it until you go into the
setting mode. The year will flash.
3) Press up button " " or down button " " to change the year.
4) Press main button " " to confirm the year and move to month setting.
2
Main Button ( )
Press to turn on/off
meter or go into
setting model.
Auto Code Key
Auto Code Release Button:
Please contact the local
service for help, if needing to
change the auto code key.
Test Strip Port:
Insert test strip here until
you hear a click.
Battery Cover:
Slide cover to
change batteries.
Test strips vial
Control Solution
Lancing Device
Lancet
Down Button ( )
For operating the
meter, please check
details in following
sections.
Batteries Installation
1
1) Turn the meter over. Press and push battery cover to open.
2) Install the battery. Be sure to put battery in correct direction.
3) Slide the battery cover back until it snaps into place.
3
Setting Up Your Meter - Set the Date, Time, Volume and Measurement Unit
Auto code key has the function of auto-coding. The meter can automatically detect the code number
on strip, and hence it is no need to change code key unless it’s malfunctioned.
Auto Code Key
Front View of Meter
Back View of Meter
Test strips
Sample Entry
View Window
Protective cover
5) Repeat steps 3 and 4 to change the date, time format, hour, minute and measurement unit.
After pressing the main button to confirm the measurement unit, your set-up has been finished.
Up Button ( )
For operating the
meter, please check
details in following
sections.
1
2
Plunger
Hub
Lancet carrier
Release button
Safe switch
Depth adjustable cap
GM700
GETTING STARTED GUIDE
( For self-testing )
Display Window:
Show your test result,
messages and relative
information.
NOTE
-
Please contact the local service for help, if needing to change the auto code key.
