2
1
4
3
5
6
Instructions for the GD500 Lancing Device
Plunger
Hub
Lancet c
arrier
Release button
Safe switch
Depth adjustable cap
The protective cover
The disposable lancet
The GD500 lancing device is reusable
lancing device for the single user. It could
automatically inject the lancet into and
retract it from the fingertip to obtain a
capillary blood sample for glucose
monitoring or other test that require one or
two drops of blood.
A depth adjustable cap allows the best depth
of skin penetration for each individual user.
Special Features
- Special safety design: when the cap is open, the trigger will be relieved automatically which prevents
you from being pricked in case you accidentally press the release button.
- Lancet eject function: press the release button in one hand and pull on the plunger in the other hand
will safely eject the used lancet which prevents you from being pricked when the cap is open. ( please
refer to the figure of step10 )
- Less pain pricking: exact and vibration free guidance of the lancet makes almost painless feeling when
you get the blood sample.
- Proper spring force: allow user to pull on the plunger for pricking easily.
- Clear indications of depth penetration: allow user to adjust for proper sample volume easily.
Cautions:
-
- The RIGHTEST Lancing Device is intended for single user. To avoid exposure to contaminants, do not
use the RIGHTEST Lancing Device on multiple users.
- For safety and to prevent cross-contamination, always discard used disposable lancets in an
appropriate puncture-proof or biohazard container.
- Except following the use instructions, please don't disassemble the lancing device under any condition.
- The lancing device contains some small parts which could result in choking
hazard for children.
Be careful not to be pricked by the lancet whenever the adjustable cap is open with lancet loaded.
Instructions for use:
Please
clean your hands with soap and warm water; dry them thoroughly.
Warming your hands will help in obtaining a blood sample. Follow the steps
below. Each step corresponds to the number illustrations.
1. Hold the depth adjustable cap in one hand and hold the hub in the other
hand. Bend the cap towards the down side, until a gap appears between
the cap and hub.
2. Pull the cap and hub off in opposite directions, remove the cap.
3. Insert a new disposable lancet firmly into lancet carrier.
4. Twist off and set aside the protective cover of the disposable lancet.
5. Replace the depth adjustable cap.
6. Choose a depth of penetration by rotating the top portion of the depth
adjustable cap until the setting depth matches the window. Settings are
based on skin type
” “ for soft or thin skin;
” “ for average skin;
” “ for thick or calloused skin.
TM
