8-9
Questions? Refer to Page 10-10 for Technical Support Instructions.
1. Press 1
for
Test Setup.
2.
Press
5
for
Security
to continue to
the
Security Glucose QC Interval
screen.
3.
If Ketone testing is enabled, press
1-Next
to continue to the
Security Ketone QC
Interval
screen, otherwise, press
1-Next
to skip down to step 5.
4.
Press
1
-
Next
to continue to the
Security Operator ID Not Certified
screen.
5.
Press
1
-
Next
to continue to the
Security Strip Lot Not on List
screen.
6.
Press
1
-
Next
to continue to the
Security Patient Data Not Confirmed
screen.
Chapter 8: Review Setup
What You See on the Display
What You Do
Comments
Review Test Setup for Security
Note:
This section illustrates some representative settings.
If the monitor does not display these screens, please refer to Chapter 10, Troubleshooting.
