Setup pages
62
When clicking the ‘add user’ button or a username, the Modify User page appears.
Here you can enter the User ID (used on the login screen), name, contact info and a
password.
If an E-mail address is entered, then alarms will be sent to this address (if user is
configured as an alarm recipient and E-mail alarm is enabled).
If a mobile number is entered, then SMS alarms will be sent to this number (if user is
configured as an alarm recipient and SMS alarm is enabled).
To configure a user as an alarm-recipient, enable one or more of Alarm classes
(Class 1-10). It has to be set to get alarm mail or SMS for an alarm point with the
corresponding alarm class set. Make sure that the alarm has the correct alarm class
set when edit the alarm point. Refer to section
on page
for more
information on configuring alarm classes.
Note:
The user will only receive alarms that match the alarm class selection.
The “Receive log files via E-mail” option configures whether this user will receive
logs via E-mail or not. See section
on page
for more details about this
function.
The language selection defines which language will be used for this user.
Summary of Contents for SREA-01
