Audio Adapter Kit
Shotgun Microphone and Audio Adapter For DSLR
Cameras and Video Cameras
Cautions
1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place.
2. Please use and store it in normal temperature. Do not move it from overheated to supercooled
condition frequently as well as keep away from heat sources such as heater and oven.
3. When using and storing, please pay attention to dust and moisture.
4. Be careful to violent collision.
1 Product Introduction
1.1 General Introductions
The Saramonic MixMic adapter and microphone kit includes an SR-NV5 shotgun microphone and
an adapter, allowing connection of your camera to professional-level microphones, mixing consoles
and sound studios. The adapter features two pro-standard XLR terminals for maximum operating
flexibility, providing separate volume controls of two channels, gain setting and wind noise reduction.
The Mic/Line input switching helps you capture detailed recording levels and control low frequency
sound.
1.2 Product Structure
Two balanced XLR inputs
Microphone Holder
Microphone
Windshield
Standard Cold Shoe
Standard Cold Shoe Mount
Recording Channel Switch
Selects CH1.CH2 is for one microphone recording,
It could send the mono audio signal to each
channel and mix them together to output stereo
audio signal.
Selects CH1 is for two channels recording. It
provides two separate channels of audio
0dB, +10dB, +20dB Gain Level Switch
LINE / MIC/ MIC +48V Switch
Select LINE or MIC or +48V phantom levels
When set to LINE, the signal will be attenuated
about 30dB.
LED Indicator
Green light: power on
Red light: low battery
POWER ON/OFF Switch
Low Cut Switch
To attenuate signals with frequencies lower than
150Hz. It can be used to remove rumble or other
low frequency noise while recording.
CH1 and CH2 Volume Control
Adjust the signal of each channel to the optimum
recording levels.
MixMic
