Changing network settings
35
Note:
Make sure that your browser is not configured to use proxy server for this
address.
4. Login in with username
admin
and password
admin
:
5. Select Setup – Ethernet from the menu and enter the new network settings. Save
the settings when you are finished and reboot the module. Refer to the section
on page
for more information.
6. Restore the network settings of the PC. This is done exactly the same way as in
step 2, except that this time the settings that you wrote down previously are used.
Summary of Contents for SREA-01
