Fault tracing
93
• If you have a drive connected at node address 247, it can not be detected
automatically as this address is reserved for special functionality. It is possible,
however, to use a drive at this node address by configuring it manually.
Problem: The drives are found by SREA-01, but their models are not identified
automatically
• On the Configuration – Templates page, check that the correct template file for
your drive is installed. If it is not, you can upload it if it is available.
• Some drives, such as the ACS800, can not be identified automatically. If you have
such a drive, you have to select the correct template manually.
Problem: When importing a log file to Microsoft Excel, the data is not
separated in columns
• Check that you have selected the correct decimal and field separators from the
Setup – Regional page. The selection should match the PC.
• Try the Text to Columns feature of Excel to fix the file. In Excel 2003, it is located
in the Data menu.
Problem: Transparent Modbus/TCP does not work
• Check the settings on page Setup – Modbus. Check that IP authentication does
not block the client, that the port is correct and that the gateway register is not
overlapping an actual drive.
Problem: SREA-01 cannot send E-mails
• Check that you are using the correct SMTP server. If SREA-01 is not connected
to a company network, be sure to use the SMTP server of the Internet Service
Provider that is used to connect SREA-01 to Internet.
• Check that your spam filter does not prevent you from receiving E-mails from the
address of SREA-01.
Problem: Only one alarm message is received from SREA-01 even when an
alarm occurs multiple times
• Check that alarm acknowledges are disabled in Configuration – Alarms. If they
are enabled, the alarm has to be acknowledged on the Alarms page before a
message is sent next time.
Summary of Contents for SREA-01
