![background image](http://html.mh-extra.com/html/abb/srea-01/srea-01_user-manual_219100.webp)
Appendix C: Creating custom device templates for unsupported devices
100
Note:
You must always add a Group before you can add a Parameter.
When you have created a Group, and at least one parameter, it is possible to edit the
Parameter by clicking the ‘edit’ button. This will bring up the following screen (Edit
Parameter):
The Edit Parameter screen contains the following fields:
Name
– Description of the parameter.
Type
– Modbus type (Holding, Input, Coil, Discrete)
Address
– Modbus address
Summary of Contents for SREA-01
